Industrial UF Ultrafiltration Water Filter——For Wastewater Treatment
Share To：
Polyvinylidene fluoride (PVDF) ultrafiltration membrane exhibits exceptional corrosion, oxidation, acid, and alkali resistance, ensuring chemical stability. Employing fiber composite technology and permanent hydrophilic modification, it forms a gradient mesh pore structure with precise pore size control. This enables accurate material separation, high recovery rates, and stable performance, achieving bacterial retention rates over 4LOG while enhancing water flux. Operating on a screening mechanism, PVDF ultrafiltration membranes bridge the gap between microfiltration and nanofiltration. Their performance in water purification depends on operating pressure and membrane pore size. Membranes of varying pore sizes can selectively separate specific products in material separation systems. Due to their fine pore size, PVDF ultrafiltration membranes effectively remove suspended solids, colloids, microorganisms, macromolecules, bacteria, and viruses from aqueous solutions, making them ideal for a wide range of water treatment applications.
Category：
Keywords：
Industrial UF Ultrafiltration Water Filter——For Wastewater Treatment
Product Details
ADVANTAGES
1. High filtration precision, reliable purification results
The membrane pore size is typically 0.001-0.1μm, effectively intercepting impurities such as bacteria, viruses, colloids, large organic molecules, and suspended solids in water, while retaining beneficial minerals (such as calcium and magnesium ions). The resulting filtered water is crystal clear, directly meeting basic purification needs for drinking water, industrial process water, and other applications.
Case: After being used by a municipal water plant, the turbidity of raw water dropped to below 0.1NTU, and the bacteria removal rate was as high as 99.9%.
2. High Flux and Efficiency
The hollow fiber structure significantly increases the membrane's specific surface area (effective filtration area per unit volume), resulting in higher filtration flux for the same volume. This allows for rapid treatment of large volumes of water, making it suitable for large-scale water treatment applications (such as municipal and industrial wastewater treatment).
Case: In a wastewater treatment project in an industrial park, the average daily processing capacity of a single membrane module reached 5,000 m³, meeting the reclaimed water reuse needs of approximately 3,000 people.
3.Low operating costs and excellent energy efficiency
The filtration process requires only a low operating pressure (typically 0.1-0.3 MPa), resulting in significantly lower energy consumption than deep filtration technologies such as reverse osmosis. Furthermore, the membrane modules can be restored through backwashing and chemical cleaning, extending their service life (typically 3-5 years) and reducing replacement costs.
4.Strong anti-pollution ability and wide adaptability
Some materials (such as PVDF membranes) are resistant to acid, alkali, and oxidation, and can withstand complex water conditions (such as highly polluted industrial wastewater and high-salinity environments). Processes such as cross-flow filtration can reduce the deposition of pollutants on the membrane surface, slowing membrane fouling and maintaining stable operation.
5. Flexible Application Scenario and Strong Compatibility
It can be used independently as a deep filtration unit or in combination with other processes (such as pretreatment, reverse osmosis, and nanofiltration). It is highly compatible with a variety of scenarios, including drinking water purification, wastewater treatment and reuse, and industrial purification.
SPECIFICATION
Model | YX-UF-6K | YX-UF-20K | YX-UF-60K | YX-UF-150K | |
Membrane Material | MPES | MPES | MPES | MPES, MPVDF | |
Molecular cut off（Dalton） | 6000 | 20000 | 65000 | 150000 | |
Inner/Outer Diameter（mm） | 0.4 / 0.6 | 0.8 / 1.4 | 1.5 / 2.3 | 3.5 / 5.0 | |
Pure Water Flux（L/m2h.bar） | 50 | 100 | >150 | >500 | |
Burst Pressure（Mpa） | >0.8 | ||||
PH Range | PES: 2-13, PVDF: 2-11 | ||||
Chlorine Resistance | Excellent | ||||
Adapt temperature（℃） | 1 ~ 80 | ||||
Model Selection Recommendations:
- If the molecular weight of large organic molecules in the water being treated is between 10,000 and 30,000, the YX-UF-20K (MWCO 20,000) is preferred, as it accurately intercepts target substances.
- Membrane filaments with smaller inner/outer diameters (e.g., 0.4 / 0.6 mm) are suitable for compact equipment, provide faster water flow, and are ideal for low-contamination water. Membrane filaments with larger outer diameters (e.g., 3.5 / 5.0 mm) are more resistant to clogging and are suitable for high-turbidity water.
Workshop Video
Yuanxian High-tech Material is a company serving a worldwide customers base providing innovative and reliable product solution that recognizes the value of customer care. The main activity involves high performance steel and new polymer material field. We give stablity of attention to our customers' needs ,and supply the right product to them.
Corporate promotional video 1
Corporate promotional video 2
Cooperative Partner
Yuanxian High-tech Material is a company serving a worldwide customers base providing innovative and reliable product solution that recognizes the value of customer care. The main activity involves high performance steel and new polymer material field. We give stablity of attention to our customers' needs ,and supply the right product to them.
Releated Product
Yuanxian High-tech Material is a company serving a worldwide customers base providing innovative and reliable product solution that recognizes the value of customer care. The main activity involves high performance steel and new polymer material field. We give stablity of attention to our customers' needs ,and supply the right product to them.
Certificates
Yuanxian High-tech Material is a company serving a worldwide customers base providing innovative and reliable product solution that recognizes the value of customer care. The main activity involves high performance steel and new polymer material field. We give stablity of attention to our customers' needs ,and supply the right product to them.
FAQ
Yuanxian High-tech Material is a company serving a worldwide customers base providing innovative and reliable product solution that recognizes the value of customer care. The main activity involves high performance steel and new polymer material field. We give stablity of attention to our customers' needs ,and supply the right product to them.
Yuanxian High-tech Material is a company serving a worldwide customers base providing?
Yuanxian High-tech Material's founder Mr Li is an expert of Material Engineering?
Yuanxian Material Corporation, with a registered ?
In order to serve customers well, he creats this company?
Copyright © 2023 Polymer Material